Canon LBP 1760 - B/W Laser Printer User Manual Download Page 82

Page: 82 / 234

FORMAT FLASH allows you to format the optional Flash ROM module so that you

can store fonts and macros on it. When FORMAT FLASH is selected, the following

sub-messages are displayed prompting you to confirm whether the Flash ROM should

be formatted or not. Please consult the Getting Started Guide (pages 28 to 30) for

detailed information on installation and menu operation.

These messages are only displayed if you have installed the optional Flash ROM

Module FR5 in the printer.

Formatting or reformatting the Flash ROM Module FR5 will erase any fonts
or macros that were pre-installed, or have been stored, on the module.

+FORMAT FLASH

Confirms the formatting of the Flash ROM module.

-IGNORE FLASH

Cancels the Format Flash operation.

+REALLY FORMAT

This actually starts to format the Flash ROM module.

-IGNORE FLASH

Cancels the Format Flash operation.

CONFIG MENU
FORMAT FLASH

The Standard Printing Environment Settings

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews:

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 82 / 234

Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews: