Canon LBP 1760 - B/W Laser Printer User Manual Download Page 85

Page: 85 / 234

The Standard Printing Environment Settings

PARALLEL MENU

Shaded menus appear after an option has been installed. E.g. A5 module with the
Adobe PostScript 3 software or Network cards.

If there is insufficient memory, MEMCONFIG may not appear, even after the A5
module has been installed.

Press Go to take the printer off-line

Press Menu to display the first menu name

PERSONALITY is displayed only after the A5 module for Adobe PostScript 3 is

installed. Until you install the A5 module, PCL is the standard personality of your

printer.

With this setting you can set the parallel port for automatic personality switching or

dedicate the parallel port for only one personality. This feature sets the personality

only for printer streams received on the parallel port.

AUTO

The printer samples the print stream on the parallel port and
automatically switches to the personality required to print the job.

PCL

The parallel port is dedicated to the PCL personality and will print

only PCL data and will not switch to the PostScript personality if

a PostScript print stream is received on the parallel port. However,

special commands sent to the printer with the print stream can

force the printer to switch to the PostScript personality.

The parallel port is dedicated to the PostScript personality and will

print only PostScript data and will not switch to the PCL personality

if a PCL print stream is received on the parallel port. However,

special commands sent to the printer with the print stream can

force the printer to switch to the PCL personality.

PERSONALITY=
AUTO

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews:

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 85 / 234

Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews: