Canon LBP 1760 - B/W Laser Printer User Manual Download Page 60

Page: 60 / 234

Setting duplex printing from the printer control panel

You can set the printer for duplex printing by using the Printer Setup feature from

within your software application program running under Microsoft Windows 98/95,

or Windows NT version 4.0. Alternatively, you can set duplex printing from the

printer’s control panel.

Follow the procedure below to use the printer’s control panel to select a page

orientation and turn duplex printing on and off.

Press

to take the printer off-line. The

On Line

indicator should be off. The

READY message will change to PAUSED.

Press

Menu

. PCL MENU will appear in the top line.

Select a page orientation. Press

Item

until you see ORIENTATION in the top line.

Press

Value

to select PORTRAIT or LANDSCAPE in the bottom line. Press

Enter

Press

Menu

until you see FEEDER MENU in the top line.

Press

Item

until you see the duplex printing item in the bottom line.

If DUPLEX does not appear in the menu, this means the Duplex Unit
DU-52 is not installed correctly.
For details, refer to the Getting Started Guide for installation procedures.

Press

Value

to select DUPLEX=ON in the bottom line and press

Enter

Press

Item

to display the binding setting (BINDING) in the bottom line.

Press

Value

to enter your selection. Select LONG (long edge binding) or SHORT

(short edge binding).
Press

Enter

. The printer is set for duplex printing with the binding method you

selected.

Press

to put the printer back on-line.

Use your application software program to start the print job.

Duplex Printing

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews:

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 60 / 234

Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews: