Canon LBP 1760 - B/W Laser Printer User Manual Download Page 32

Page: 32 / 234

Paper size

To select the paper size, source and media type, click Paper.

Portrait or landscape

Under Paper Size, click Portrait or Landscape to set the direction of printing on the

page.

Portrait

Prints from left to right across the width of the page (letter style).

Landscape

Prints from bottom to top across the length of the page. Landscape

orientation is convenient for spreadsheets or other printouts that

require more width for printing.

Paper size

Below Paper Size, click the down arrow to open the drop-down list of standard paper

sizes.

Paper source

Source

Below Paper Source, click the down arrow to open the drop-down list of paper source

options.

Setting Up the Printer Driver

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews:

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 32 / 234

Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews: