Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 73 / 234

65
3
The Standard Printing Environment Settings
FNTSRC (font source) allows you to set the default for font selection. After you print
a font list, you will see the fonts listed as internal fonts or soft fonts (see page 98).
INTERNAL Selects internal (resident) fonts.
SOFT
Selects permanent soft fonts. Permanent soft fonts are downloaded
to the printer’s memory by software applications. These fonts are
not erased from memory once a job is completed. They remain in
RAM until the printer is turned off.
FLASH Selects fonts that have been downloaded and stored in the optional
Canon Flash ROM Module FR5.
FONTNUM (font number) allows you to set the font default by its number. The printer
assigns a font number to every typeface. Print a PCL Font List to see the numbers assigned
to the fonts. The font number (Font #) is the first column in the list (see page 99).
You must select FNTSRC (font source) before FONTNUM will appear.
If the currently selected font does not support the orientation or symbol set
you’ve selected, the printer control panel font selection returns to the 000
factory default setting.
0
Courier is selected unless you change the setting.
1-999
To increase the number, press
Value
. You can quickly scroll
through the numbers in increments of 10 by holding down
Value
.
To decrease the number, press
Shift
and
Value
, or press and hold
Shift and Value to move backward quickly in decrements of 10.
The font souce is shown in the Font List by the first character on every line:
I Internal (resident) fonts
S Soft fonts
F
Flash ROM fonts
PT.SIZE (point size) is the measured vertical height of a typeface. There are 72 points
per inch, so a 36-point font is half an inch high, measured from the top of the upper-
case letters to the tail of the letter y.
PCL MENU
FNTSRC=INTERNAL *
PCL MENU
FONTNUM=0
*
PCL MENU
PT.SIZE=12.00
*