Home
/
Canon
/
LBP 1760 - B/W Laser Printer
/
User Manual

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 37 / 234

Share

Page: 37 / 234

Canon LBP 1760 - B/W Laser Printer User Manual Download Page 37

29

2

• Do not load transparencies in the paper cassette. For transparencies, use the

Multi-Purpose tray.

• For high-volume printing, you can add the optional paper feeder to increase

the capacity by 500 sheets of cut-sheet paper (80 g/m

2

or 21 lbs.). For

details, see the “Guide to Installing Printing Options on to the Printer”
section of the Getting Started Guide.

• During printing, do not open or close the paper cassette, while the paper is

being fed, etc. The vibration caused by doing so, especially when loaded
to full capacity, will cause the image to move and adversely affect the
quality of the printout.

• The paper volume status bar shows how much paper remains.

Paper volume
status bar

4

Reinsert the cassette into the printer: align the cassette with the rails on the printer, then
lift slightly to insert the cassette. Slide it all the way into the printer.

5

Check the

On Line

indicator and ensure it is on. Check the display and be sure

READY is displayed in the top line.

6

Start to print from your software application.

Printing from the Standard Paper Cassette

«
...
35
36
37
38
39
...
»

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Reviews:

No comments