Canon LBP 1760 - B/W Laser Printer User Manual Download Page 225

Page: 225 / 234

217

Glossary

toner

Dry, black carbon powder used to create the image on paper. The toner in your EP-

52 cartridge is permanently sealed inside.

total RAM

The total amount of random access memory available for creating print images and

storing downloaded fonts and other data before they are printed. If you want to know

the total RAM of your printer, print the TEST PRINT.

translator

See personality.

transparency

A print media commonly referred to as film used for overhead projection presenta-

tions.

typeface

Refers to the design of printed characters. The name of a font, like Times Roman,

Helvetica, Courier, etc., is the name of the typeface design.

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews:

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 225 / 234

Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews: