manualshive.com logo in svg

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 69 / 234

Share
Download
Canon LBP 1760 - B/W Laser Printer User Manual Download Page 69

61

3

The Standard Printing Environment Settings

The Standard Printing Environment
Settings

Before you read through this section, keep the following points in mind.

■

Explanations are based on the assumption that all the factory default settings are in
effect.

■

The default settings appear to the right of the equal sign (=) in the display with the
item name and are explained first in the lists of values.

■

All the items and values are explained. However, several of these menus and items
are hardware dependent. They won’t be available until the corresponding option is
installed.

■

Details of the items and values that appear in the PS menu only appear after the
optional A5 module is installed. These are explained in Chapter 5.

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Reviews:

No comments