Canon LBP 1760 - B/W Laser Printer User Manual Download Page 215

Page: 215 / 234

207

Glossary

data bits

The number of bits (usually 7 or 8) contained in a packet of data that is being

communicated from one computer to another via a network or modem.

Stands for decibel, a unit of measurement for the intensity of sound generated by

equipment. The lower the measurement, the lower the noise level.

default

A setting or value that remains in effect until you turn the printer on or off or change

the numeric setting. The printing environment is set at the factory before the printer

is shipped. These settings are called factory defaults and remain in effect until you

change them. If you change a setting, this becomes the default and remains in effect

even after you turn the printer off. This new setting is called simply a default or power-

on default. You can restore the factory defaults by initializing the printer with a cold

reset.

DIMM

DIMM stands for dual in-line memory module. Memory DIMMs are optional plug-

in attachments for ROM sockets on the main circuit board inside the printer. There

are two ROM sockets provided for ROM DIMMs. The A5 module for Adobe

PostScript 3 and the Flash ROM. There are also two RAM DIMM sockets each of

which can hold up to 16 MB of RAM memory.

dot matrix

A pattern of dots arranged in a matrix used to form characters. The larger the matrix,

the finer the character. For example, because a 1200-dot matrix can use more dots; it

can produce a character more refined than one from a 600-dot matrix.

dot matrix printer

A non-letter quality impact printer in which the print head consists of tiny solenoids

that drive small wires onto an ink ribbon to form patterns of dots on paper between the

print head and platen.

downloaded fonts

See soft fonts.

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews:

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 215 / 234

Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews: