Canon LBP 1760 - B/W Laser Printer User Manual Download Page 201

Page: 201 / 234

193

Appendix 3: Print Media Specifications

Transparency film

We recommend use of Canon transparency film. Transparency film must be capable

of withstanding high temperatures of 190

C (374

F).

Adhesive labels

Adhesive labels can be used in the printer provided they are suitable for use in laser

printers. They should be fed from the Multi-Purpose tray. Attempting to print on

inappropriate labels can cause serious damage to the printer. You must follow the

guidelines below when you print on adhesive labels.

■

The print face of the label sheets must be of ordinary matte finish, similar to copy
paper.

■

The label sheet must be able to withstand high temperatures of 190

C (374

F).

■

The paper backing must not be made of easily removable coated paper.

■

Never use labels with exposed adhesive. Exposed adhesive can stick to the
photosensitive drum of the toner cartridge or roller, causing labels to peel off and
cause paper jams and serious damage to the printer.

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews:

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 201 / 234

Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews: