manualshive.com logo in svg

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 169 / 234

Share
Download
Canon LBP 1760 - B/W Laser Printer User Manual Download Page 169

161

7

Correcting Poor Print Quality

When you see black spots or white specks ...

If black spots or white specks appear on the printed pages, the fixing roller inside the

fixing assembly unit may be dirty.

Follow the instructions below to clean the fixing assembly by printing the Cleaning

Page using the operation panel menus.

1

Remove any paper in the Multi-Purpose tray. (If the tray is closed, open it.) Make sure
that DUPLEX in the FEEDER MENU is set to OFF (see page 70).

2

Load one sheet of blank A4- or Letter-size copier paper (64 to 90 g/m

2

) into the tray

and open the face-up tray.

3

Press 

Go

 to take the printer off-line. The 

On Line

 indicator goes off.

4

Set the PAGESIZE item in the PCL MENU and the MPTSIZE item in the FEEDER
MENU to A4 or LETTER, according to the paper size you loaded in the tray. (See
pages 63 and 69.)

The settings for the paper size in PAGESIZE and MPTSIZE must be the
same to print the Cleaning Page successfully. Otherwise, the error message
WRONG PAPER SIZE will appear or a paper jam may occur.

5

Press 

Menu

 until you see TEST MENU in the top line.

6

Press 

Item

 until you see CLEANING PAGE in the bottom line.

7

Press 

Enter

. The message LOAD A4 (or LETTER) IN MANUAL appears in the LCD

panel.

8

Press 

Go

 to print the Cleaning Page. The printed page is delivered to the face-up tray.

9

Check that the message LOAD CLEANING PAGE IN MANUAL appears in the LCD
panel.

Black spots

Cleaning
Page

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Reviews:

No comments