manualshive.com logo in svg

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 142 / 234

Share
Download
Canon LBP 1760 - B/W Laser Printer User Manual Download Page 142

134

Messages Table

This is a comprehensive list of printer messages.  Some of the messages indicate errors

or problems, and others inform you of the current status of the printer.  If you have any

questions, contact your local supplier.

Messages marked with “ ( ) ” can be skipped by pressing 

Go

.

FLASH OVERFLOW

A memory overflow has occurred in the optional Flash ROM.
The printer has received more font and macro data than it can hold in the
available memory of the Flash ROM. The printer goes offline.
Press Go to take the printer back online.
Format the Flash ROM or delete font and macro data to create more
space.

FLASH ERROR

An error has occurred when trying to format, or read or write data
to the optional Flash ROM.
Replace the Flash ROM.

FLASH FORMAT

The optional Flash ROM has been formatted using the FORMAT
FLASH item. The printer will restart.
No action required

FLASH

The optional Flash ROM is being formatted.

FORMATTING...

No action required.

5F-50 ERROR

A fuser overheating error.

CALL FOR SERVICE

Turn the printer off, wait 15 minutes and then turn the printer back on.
If this error persists, turn the printer off, unplug power cord from the wall
and call for service.

5F-52 ERROR

A scanner motor or laser unit error.

CALL FOR SERVICE

If this error persists, call for service.

5F-54 ERROR

A main motor failure error.

CALL FOR SERVICE

If this error persists, call for service.

5F-56 ERROR

A duplex unit fan error.

CALL FOR SERVICE

This message only appears if an error occurs in the optional duplex unit.
If this error persists, call for service.

5F-59 ERROR

A fan failure error.

CALL FOR SERVICE

If this error persists, call for service.

5F-60 ERROR

A duplex unit error.

CALL FOR SERVICE

If this error persists, call for service.

Responding to Error Messages

RESTART

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Reviews:

No comments