manualshive.com logo in svg

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 102 / 234

Share
Download
Canon LBP 1760 - B/W Laser Printer User Manual Download Page 102

94

Printing a Test Print

Printing a Test Print

Print a Test Print when you need to visually check the current configuration of the

printer.  The Test Print has three important functions:

■

Listing all the current menu settings.  If no settings have been changed on the printer,
you will see the factory default settings.

■

Listing other important system information, such as the amount of memory in the
printer (RAM size), total page count for the printer, version and revision numbers,
etc.

Follow this procedure to start a Test Print for the current personality.

1

Press 

Go

 to take the printer off-line. The 

On Line

 indicator should go off. PAUSED

will appear in the display.

2

Press 

Menu

 until you see TEST MENU in the top line.

3

Press 

Item

 until you see TEST PRINT in the bottom line.

4

Press 

Enter

 to start printing the Test Print.

After the pages are printed, press 

Go

 to put the printer back on-line.

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Reviews:

No comments