Canon LBP 1760 - B/W Laser Printer User Manual Download Page 221

Page: 221 / 234

213

Glossary

off-line

When the printer is off-line, you cannot print, but you can use the buttons on the printer

control panel to view and change the printer settings. When the

On Line

indicator is

off, the printer is off-line. The printer must be off-line before you can press the other

buttons to display the printer menus, items and values. Press

to take the printer

on-line and off-line.

on-line

When the printer is on-line, it is ready to print. Every time you start a print job, check

the

On Line

indicator to ensure it is on. If you press other buttons on the printer

control panel while the printer is on-line, the printer will beep to tell you that these

buttons are presently disabled. Press

to take the printer on-line and off-line.

orientation

Refers to the direction of printing on the page. Printing across the width of the page

is called portrait orientation and printing across the length of the page is called

landscape orientation.

paper jam

When a sheet of paper stops in the printer. A jam must be removed before you can

continue printing.

parallel interface

Transmits data in one-byte segments along a parallel cable.

parity

Parity is set to odd, even or none. It checks to see if data has been sent correctly or not.

PCL

See personality.

personality

A personality refers to the languages supported by the printer. The printer supports

two personalities: PCL and PostScript. For a printer to respond properly to the print

data stream, it must have the correct personality that can interpret the data and execute

the commands as they come down from the host computer.

pitch

The number of characters per measured inch. The term pitch is applied only to fixed

fonts.

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews:

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 221 / 234

Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews: