Canon iR1600 Series, Service Manual

Page: 709 / 738

COPYRIGHT © 2002 CANON INC. 2001 2001 2001 2001 CANON Printer Board-N1/iN-E5 REV.0 MAR. 2002
2 - 5
CHAPTER 2 OPERATION
1.3 Functional Block (network interface board)
The following is a functional block of the network interface.
a.Interface
A RJ-45 connector for 10/100Base-T comes as standard for an Ethernet configuration.
(The board uses 100Base-TX as standards it supports for 100Base.) The network interface
board is equipped with an automatic function to switch between 10Base-T and 100Base-
TX, so that it supports a network on which these 2 different speeds exist by automatic de-
tection and switching.
b. Transmission Function (if equipped with fax functions)
When the network interface board is mounted, images scanned by the reader unit of the
host machine may be transmitted to an external device over a network.
• E-mail/i FAX
An image that has been scanned may be sent as an attached file of an e-mail to a PC
or an i-fax connected to the same network.
An e-mail may be in simple mode or in e-mail mode.
In the case of simple mode, the format of the attached image will always be TIFF
(MH).
In the case of e-mail mode, on the other hand, the format of the attached image may be
any of 4: TIFF (MMR, MR, MH), PDF.
• FTP
An image that has been scanned may be transmitted to an FTP server for uploading.