Canon iR1600 Series Service Manual Download Page 129

Page: 129 / 738

CHAPTER 3 IMAGE READING/PROCESSING SYSTEM

2000

CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002

3-17

4.9 Edge Emphasis

Edge emphasis prevents blurred or crushed outlines of images by enhancing the

changes in density, bringing about well defined images and enabling faithful reproduction
of characters in test mode.

4.10 Editing

The machine offers blanking/masking, negative/positive reversal, and the like as editing

functions.

4.11 Density Conversion (LUT, i.e., look-up table processing)

In this block a data conversion table is used to convert intensity signals into density sig-

nals or to enable the best output density curve for each mode.

4.11.1 Density Adjustment (F-value conversion)

An F-value conversion table best suited to the copy density selected in the control panel

is used to adjust density.

4.11.2 Density Correction (

correction)

correction, the contrast and the density of image data are corrected. When an image

is read, the image data is subjected to conversion using a

conversion table.

Summary of Contents for iR1600 Series





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iR1600 Series

Reviews:

Related manuals for iR1600 Series

Brands by name

Popular brands

Canon iR1600 Series, Service Manual

Search results

Summary of Contents for iR1600 Series

Reviews:

Related manuals for iR1600 Series

Brands by name

Popular brands