Canon iR1600 Series, Service Manual

Page: 720 / 738

COPYRIGHT © 2002 CANON INC. 2001 2001 2001 2001 CANON Printer Board-N1/iN-E5 REV.0 MAR. 2002
3 - 8
CHAPTER 3 DISASSEMBLY/ASSEMBLY
b. Setting the COLD RESET A4/LTR
Execute the following steps to register
the default paper size.
1) Press the additional functions key and
then the #/ID (#) key to set the ma-
chine to the service mode.
2) Select #8 PDL with the cursor key and
press the OK key.
3) Select PDL-PCL MENU with the cur-
sor key and press the OK key.
4) When the default paper is A4, select
COLD RESET A4 with the cursor key
and press the OK key. When it’s Letter,
select COLD RESET LETTER and
press the OK key.
After about 45 sec, the printer mode
will return to the READY status.
If the setting is incorrect, it
will be impossible to generate
the test print etc.
5) Press the Go/OK key to end service
mode.
6) Turn off the power.
7) Mount the hard disk (option) and the
network board (option).
8) Turn on the power switch.
9) Enter necessary settings referring to
the TEST PRINT output in Steps 1)
and 2) and the Ethernet configuration
page (for machines with the network
board only).
10) Turn off the power switch with the
shutdown menu.
11) End.