Canon iR1600 Series, Service Manual

Page: 619 / 738

CHAPTER 14 VERSION UP
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
14-13
2.4 Downloading the System Software
a.Before Mounting
If you are upgrading the machine (i.e., replacing the ROM DIMM or downloading from
a PC), you will have to execute ‘ALL CLEAR’ after mounting. Be sure to print out the
stored data before you start installation or upgrading.
· Printing Out the Stored Data
1) If the machine is equipped with fax functions, print out a one-touch dial/speed dial/
group address list and communications control report.
2) If the machine is equipped with fax functions, print out all transmission/reception im-
ages.
3) Generating a Counter Report
In service mode, make the following selections: #10 REPORT>COUNTER REPORT.
The Counter Report provides the following contents:
1. various counter data
2. data produced as the result of changes made to factory settings (user data/service data)
3. system dump list
b. Making Connections
To download using a USB connection, go through the following:
1) Turn off the machine.
2) Remove the rear cover, and connect the USB connector (J3/J203) on the image pro-
cessor PCB and the PC using a USB cable. If a network interface board is mounted,
disconnect the USB cable from the board.
F14-204-01
3) Turn on the PC, and start up the Service Support Tool.
4) Turn on the machine.
[1]
J3/J203