Canon iR1600 Series, Service Manual

Page: 470 / 738

CHAPTER 13 TROUBLESHOOTING
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
13-92
[Bit 3]
Use it specify whether or not to transmit bit 33 and thereafter for the DIS signal.
If ‘prohibit’ is selected, Super Fine reception from a non-Canon machine can no longer be
used.
If ‘prohibit’ is selected, Super Fine reception from a non-Canon machine
can no longer be used.
[Bit 4]
Selects whether or not the recording paper length declared in the DIS signal is A4 size.
When receiving documents made up of long pages, to have the document divided into two
pages at the transmitting fax, select “A4 size”.
Memo
When “A4 size” is selected, this fax uses the DIS signal to tell the trans-
mitting fax that it is equipped with A4 size recording paper.
The transmitting fax that receives this DIS signal divides long pages into
A4 size pages before transmitting it to the receiving fax.
Some fax models do not so divide long documents.
[Bit 5]
Use it to disable LT/LGL declaring as a remedy against a communication fault when the
LTR/LGL cassette is used. If ‘declare’ is selected, the use of LTR or LGL is declared for
the DIS signal when the LTR/LGL cassette is fitted.