Canon iR1600 Series, Service Manual

Page: 532 / 738

CHAPTER 13 TROUBLESHOOTING
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
13-154
Control Panel Test (6-7: OPERATION PANEL)
Use it to check the operation of the control panel.
Press ‘7’ on the keypad while the Faculty Test menu is indicated to select the Operation
Panel Test menu, thereby executing the following:
a.Control Panel Test for a Fax Model
• Display Test
Press the Start key while the operation Panel Test menu is indicated to select Display
Test Mode. In this mode, the display indicates the character.
Another press on the Start key will cause the display to be entirely black.
• LED Lamp Test
At the end of Display Test mode, press the Start key to select LED Lamp Test mode.
A press on the Start key will cause all lamps in the control panel to go ON.
• Control Key Test
At the end of LED LAMP Test mode, press the Start key to select the test for a specific
key. Press the key corresponding to the character indicating on the display; the indication
will go OFF if the key is normal.
When all character indications have gone OFF, test mode for the one-touch dial keys
will start. Press each one-touch dial key so that its corresponding character will disappear
from the display.
LED Lamp Test and Control Key Test (correspondence between characters and keys)
GO OK
Shift
1:1
Special Features Monitor
#
Menu
Online Job HDD Alarm
Itern Value Enter/Cancel
I
1 2 3
4 5 6
7 8 9
ID 0 C
A
1 2 3
[T] [H]
[#] [*]
[V]
[U]
[W]
[P]
[R]
[Q] [N] [L]
[S] [O] [M] [K] [G]
[A]
[D]
[F]
[B]
[J] [E]
[I] [C]
[b]
[c]
[a] [d] [e] [f]
F13-505-11