Canon imageRUNNER ADVANCE C2225 Basic Operation Gude Download Page 84

Page: 84 / 180

Replacing the Toner Cartridge

When there is only a small amount of toner remaining inside the machine, a message appears on the touch panel display.

You can continue printing, but at this time you should purchase a new toner cartridge to have it available when needed.

When all of the toners run out completely and prints can no longer be made, a screen with instructions on how to replace

the toner cartridge appears on the touch panel display.

Follow the procedure described below to replace the toner cartridge.

If you press [Close], you can continue operations, such as setting modes and scanning originals, even if you do not replace

the toner cartridge immediately.

• Do not burn or throw used toner cartridges into open flames, as this may cause the toner to ignite, resulting

in burns or a fire .

• If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up

with a soft, damp cloth in a way that prevents inhalation . Never use a vacuum cleaner that does not have

safeguards against dust explosions to clean up spilled toner . Doing so may cause a malfunction in the

vacuum cleaner, or result in a dust explosion due to static discharge .

• Keep toner out of the reach of small children .

• If toner is ingested, consult a physician immediately .

• If toner gets onto your hands or clothing, wash it off immediately with cold water . Washing it off with warm

water will set the toner, and make it impossible to remove the toner stains .

Summary of Contents for imageRUNNER ADVANCE C2225





















































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C2225

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C2225, Basic Operation Gude

Search results

Summary of Contents for imageRUNNER ADVANCE C2225

Reviews:

Brands by name

Popular brands