manualshive.com logo in svg

Canon imageRUNNER ADVANCE C2225, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE C2225 Basic Operation Gude Download Page 38

38

•  If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/

PIN). If the Copy Card Reader-F1 is attached, first insert a control card.

•  If a login service such as Department ID Management or SSO-H has been set, press 

(Log In/Out) to log out. The send settings for the last 

send job may be retained.

 - To cancel the settings, press 

(Reset).

 - The specified destinations are not retained.

This section describes the flow of basic scan and send operations.

Sending Scanned Data (E-Mail/I-Fax/File Servers)

1

2

Selecting■Function

Select■[Scan■and■Send]■from■the■Main■Menu■screen.

Press [Scan and Send].

Scan and Send Basic Features screen is displayed.

Placing■Originals

Place■the■original■on■the■feeder■or■the■scanned■glass.

Placing■originals■in■the■feeder

Adjust the slide guides to fit the size of your originals. Neatly place 
your originals with the side to be scanned face up.

Placing■originals■on■the■platen■glass

Open the feeder.

Place your originals face down.

Gently close the feeder.

You can set various send functions. For more 
information, see from p. 40 to p. 44 in this manual.

Summary of Contents for imageRUNNER ADVANCE C2225





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands