74
5
Adjust the rear width guide in the same way as in step 4 .
1 3
1 3
2
6
Load the envelopes .
ib
1
1
2
1.■ Load■10■envelopes■at■a■time■
with■the■side■you■want■to■
print■on■facing■up.■While■
loading■the■envelopes,■press■
down■on■the■left■side■of■the■
receptacle■to■lock■them■into■
place.
2.■ Align■the■leading■edges■of■
the■envelopes,■and■make■
sure■that■they■are■held■in■
place■under■the■claws.
Load■the■envelopes■as■shown■below.
*
* Be aware of the orientation of the envelopes when loading
• Envelopes which have been rolled or curled must be straightened out prior to use.
• Make sure that the height of the envelope stack does not exceed the height limit mark (
).
• The maximum height (quantity) of envelopes that can be loaded into the cassette is approximately 1 1/4"
(30 mm).
• The maximum height (quantity) of envelopes varies, depending on the envelope type and user operating
conditions, but as a reference, 1 1/4" (30 mm) is approximately 50 envelopes.
For details on how to change the registered envelope information for the drawer, see e-Manual > Settings/
Registration.
Summary of Contents for imageRUNNER ADVANCE C2225
