Canon imageRUNNER ADVANCE C2225, Basic Operation Gude

Page: 17 / 180

17
Bef
or
e■Y
ou
■S
tar
t■U
sing
■This
■M
achine
1
19
18
17 16
2
3
5
4
6
15
14
9
7
8
13
10 11 12
Control Panel and Touch Panel Display
1
■ [Main■Menu]
Press to display the Main Menu screen. If the Main Menu screen is not
displayed when using a function, it is necessary to press [Main Menu]
before using the function.
2
■ Touch■Panel■Display
The settings screen for each function is shown on this display. Six
function keys are displayed by default.
3
■ Numeric■keys
Press to enter numerical values.
4
■ Energy■Saver■Key
Press to set or cancel the Sleep mode.
Lights when the machine enters the Sleep mode.
5
■ Settings/Registration■key
Press to specify settings/registration. (p. 21)
6
■ Counter■Check■key
Press to display the copy and print count totals on the touch panel
display.
7
■ Stop■key
Press to stop a job in progress, such as a scan, copy, or fax (scanning
only) job.
8
■ Edit■Pen
Use when operating the touch panel display, such as to enter
characters.
9
■ Start■key
Press to start an operation.
10
■ Main■Power■Indicator
Lights when the main power is turned ON.
11
■ ■Error■Indicator
Flashes or lights if there is an error in the machine. When the Error
indicator flashes, follow the instructions that appear on the touch
panel display. When the Error indicator maintains a steady red light,
contact your local authorized Canon dealer.
12
■ Processing/Data■Indicator
Flashes or blinks green when the machine is performing operations,
and maintains a steady green light when fax data is stored in memory.
13
■ Clear■key
Press to clear entered values or characters.
14
■ Reset■key
Press to restore the standard settings of the machine.
15
■ ID■(Log■In/Out)■key
Press to log in/out when a login service such as Department ID
Management or SSO-H has been set.
16
■ Brightness■Adjustment■Dial
Use to adjust the brightness of the touch panel display.
17
■ Volume■Settings■Key
Press to display the screen for adjusting settings, such as the
transmission volume and fax sending/receiving alarm volume.
18
■ [Status■Monitor/Cancel]
Press to check the status of jobs or to cancel print jobs. Also, you
can check the status of the machine such as the amount of paper
remaining in the paper source.
19
■ [Quick■Menu]
Press to display functions registered in the Quick Menu.
This section provides you with the names and functions of all the parts of the control panel and touch panel display.