66
3
Load the appropriate size paper into the paper drawer .
1, 2
1.■ Make■sure■that■the■paper■
size■setting■of■the■paper■
drawer■matches■the■size■
of■the■paper■to■load■in■the■
paper■drawer.
2.■ Load■the■paper■stack■against■
the■right■wall■of■the■paper■
drawer.
4
Change the paper drawer's paper size plate to match the new paper size .
1
3
2
1.■ Open■the■inside■cover■of■the■
paper■drawer,■and■lift■up■the■
plate.
2.■ Rotate■the■plate■so■that■the■
new■paper■size■is■on■the■
right■side■of■the■plate.
3.■ Insert■the■plate■straight■
down,■and■close■the■inside■
cover.
The paper size that cannot be used depending on the model and settings is also listed on the paper size
plate.
5
Gently push the paper drawer back into the machine until it clicks into place in
the closed position .
When returning the paper drawer to its original position, be careful not to get your fingers
caught, as this may result in personal injury .
• Only LTR transparencies can be used. Make sure that the paper drawer guides are set to 'LTR' when loading
transparencies in a paper drawer. If transparencies of a different size (other than LTR are loaded in a paper
drawer, the paper size and remaining amount of paper will not be detected correctly.
Summary of Contents for imageRUNNER ADVANCE C2225
