manualshive.com logo in svg

Canon imageRUNNER ADVANCE C2225, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE C2225 Basic Operation Gude Download Page 125

125

Troubleshooting

Booklet Finisher-M1 (Optional)

Check the location of the paper jam, and follow the procedure described below, while referring to the directions that 

appear on the touch panel display, to remove the jammed paper.

The Booklet Finisher-M1 is an optional product.

Inside the Front Cover

1

 

Open the front cover of the finisher .

2

 

Remove any jammed paper from the upper delivery guide .

*

* Upper Delivery Guide

1.■ Open■the■upper■delivery■

guide.

2.■ Remove■any■jammed■paper.

When releasing the upper delivery guide, be careful not to get your fingers caught, as this may 

result in personal injury .

The upper delivery guide is spring-loaded. When you release the upper delivery guide, it returns to its 

original position.

Summary of Contents for imageRUNNER ADVANCE C2225





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands