manualshive.com logo in svg

Canon imageRUNNER ADVANCE C2225, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE C2225 Basic Operation Gude Download Page 80

80

6

 

Close the front cover of the finisher .

When closing the front cover of the finisher, be careful not to get your fingers caught, as this 

may result in personal injury .

After the cover is closed, the stapler unit may automatically perform a "dry" stapling operation to reposition 

the staples.

Replacing the Staple Case in the Saddle Stitcher Unit (Booklet 

Finisher-M1)

When the saddle stitcher unit of the Booklet Finisher-M1 is almost out of staples and the staple case must be replaced, a 

screen prompting you to replace the staple case appears on the touch panel display. Follow the procedure described below to 

replace the staple case.

If necessary, remove all output paper in the booklet tray before replacing the staple cartridge of the saddle stitcher unit.

•  This procedure is necessary only if the Booklet Finisher-M1 is attached (the Booklet Finisher-M1 is an optional product).

•  We recommend that you order staple cases from your local authorized Canon dealer before your stock runs out.

•  Use only staple cases intended for use with this machine.

•  Remove the black part on the end before inserting the staple case.

 

Summary of Contents for imageRUNNER ADVANCE C2225





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands