76
Replacing the Stamp Ink
Cartridge (Feeder)
Originals sent via the feeder can be stamped to indicate that they have been sent. Replace the stamp ink cartridge when
the stamp mark is faint or no longer visible.
When replacing the stamp ink cartridge, take care not to allow ink to come into contact with your hands or
clothing . If ink gets onto your hands or clothing, wash it off immediately with cold water .
1
Open the covers .
1
2
1
1.■ Pull■the■lever■
→
open■the■
feeder■cover.
2.■ Open■the■inner■cover,■
holding■it■by■its■tab.
2
Load the stamp ink cartridge .
1
2
1.■ Remove■the■old■stamp■ink■
cartridge,■using■tweezers.
2.■ Push■in■the■new■stamp■ink■
cartridge■until■it■clicks,■using■
tweezers.
• Make sure that the stamp ink cartridge is not protruding from the surface.
• Insert the stamp ink cartridge properly, or paper jams may occur.
Summary of Contents for imageRUNNER ADVANCE C2225
