Canon imageRUNNER ADVANCE C2225 Basic Operation Gude Download Page 19

Page: 19 / 180

Bef

e■Y

■S

tar
t■U

sing
■This
■M

achine

●

Specifying the Main Menu Settings

You can set the number of buttons and the layout displayed on the Main Menu screen.

1. Press

→

[Main Menu Button Display Settings].

2. Press or to select the number of buttons and the layout to be displayed.
3. Select the function that appears on the list

→

change the order in which it is displayed.

4. Press [OK].

Example of Customized Screen

●

Setting the Main Menu Wallpaper

You can select the wallpaper for the Main Menu screen.

1. Press

→

[Main Menu Wallpaper Settings].

2. Select the wallpaper.
3. Press [OK].

Example of Customized Screen

Main Menu Screen Settings

• Select the function that appears on the list and press [Up] or [Down] to change the order

in which it is displayed.

• You can place or delete one blank button space by pressing [Add Blank] or [Delete Blank],

respectively.

You can specify settings for the displayed screen by pressing

on the top right of the screen. To perform this procedure, log in to the machine

as an administrator.

• The items displayed when

is pressed may differ, depending on the function.

• If authentication function is used, items displayed may differ or

may not be

available, depending on the login user's privileges.

Summary of Contents for imageRUNNER ADVANCE C2225





















































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C2225

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C2225, Basic Operation Gude

Search results

Summary of Contents for imageRUNNER ADVANCE C2225

Reviews:

Brands by name

Popular brands