Canon imageRUNNER ADVANCE C2225 Basic Operation Gude Download Page 72

Page: 72 / 180

Gently push the paper drawer back into the machine until it clicks into place in

the closed position .

When returning the paper drawer to its original position, be careful not to get your fingers

caught, as this may result in personal injury .

Never place paper or any other items in the empty part of the paper drawer next to the envelopes. Doing so

may cause paper jams.

• If output has been stopped due to an insufficient number of envelopes, load more envelopes, and follow

the instructions on the touch panel display. Printing resumes.

• If printing a COM10 No.10, ISO-C5, DL, or Monarch envelope, be aware of the orientation when setting the

original. (See e-Manual > Basic Operations.)

Loading the Envelope after Specifying the Size

This section explains how to load the envelopes that are specified in Settings/Registration into the envelope cassette.

Make sure that you change the envelope settings from the Settings/Registration screen before carrying out the following

procedure. (See e-Manual > Settings/Registration.) Otherwise, the machine may not recognize the changes you have made.

Open the drawer .

1.■ Press■and■release■the■button■

on■Paper■Drawer■2.

2.■ Grip■the■handle,■and■pull■

out■the■paper■drawer■until■it■

stops.

Summary of Contents for imageRUNNER ADVANCE C2225





















































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C2225

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C2225, Basic Operation Gude

Search results

Summary of Contents for imageRUNNER ADVANCE C2225

Reviews:

Brands by name

Popular brands