Canon imageRUNNER ADVANCE C2225 Basic Operation Gude Download Page 39

Page: 39 / 180

Flo

■of

■B

asic
■O

per
ations

Specify■the■Destination

Press■[Address■Book]■

→

■select■destination■

→

■press■[OK].

Press [Address Book].

If you are sending to only one destination, select a destination. If you
are sending to multiple destinations, select the destinations

→

press

[OK].

Start■Sending

After■specifying■the■settings,■press■

(Start).

Press

(Start).

When sending is complete, remove your originals.

You can specify the destination using the one-
touch buttons or frequently used settings. Also,
if you want to send to a new destination not
yet stored, press [New Destination]

→

enter the

destination.

If the following screen appears, press

(Start)

to scan the next original. After all of the originals
are scanned, press [Start Sending].

For more information on storing the destination
in the address book, see e-Manual > Scan and
Send.

• After a job is sent, the send settings

may be retained except the specified
destinations.

- To cancel the settings, press

(Reset).

- To send other jobs with the same

settings, specify destinations for the
jobs as the destination specified for the
previous job is not retained.

Summary of Contents for imageRUNNER ADVANCE C2225





















































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C2225

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C2225, Basic Operation Gude

Search results

Summary of Contents for imageRUNNER ADVANCE C2225

Reviews:

Brands by name

Popular brands