manualshive.com logo in svg

Canon imageRUNNER ADVANCE C2225, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE C2225 Basic Operation Gude Download Page 131

131

Troubleshooting

Inner 2Way Tray-F1 (Optional)

Check the location of the paper jam, and follow the procedure described below, while referring to the directions that appear on 

the touch panel display, to remove the jammed paper.

•  The Inner 2Way Tray-F1 is an optional product.

•  If the Copy Tray-J1 is attached to the main unit, remove all output paper from the tray.

1

 

Follow the instructions in "When an Optional Tray or Finisher Is Attached," in 

"Main Unit" to remove any jammed paper . (See p . 108)

2

Remove any jammed paper from the Inner 2Way Tray .

3

Follow the instructions on the screen .

The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper 

jam is cleared.

Summary of Contents for imageRUNNER ADVANCE C2225





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands