Protocol Settings
3-10
3
Using a TCP/IP
N
e
tw
or
k
❑
Press [On].
❑
If you want to print a banner page (the print job must be set to output a banner),
press [On]; otherwise, press [Off].
Output of a banner page is set on a print-job basis. Even if [On] is selected for
[LPD Banner Page], a banner page cannot be output for a print job, when it is
not set to output.
NOTE
You can only output a banner page if the optional Multi-PDL Printer Kit is installed.
❑
Confirm the settings you specified
➞
press [OK].
The display returns to the TCP/IP Settings screen.
●
If you do not want to use LPD as the print application:
❑
On the TCP/IP Settings screen, press [
▼
] or [
▲
] until [LPD Settings] appears
➞
press [LPD Settings].
❑
Press [Off].
❑
Confirm the settings you specified
➞
press [OK].
The display returns to the TCP/IP Settings screen.
14
Specify the Raw settings.
●
If you want to use Raw as the print application:
❑
On the TCP/IP Settings screen, press [
▼
] or [
▲
] until [RAW Settings] appears
➞
press [RAW Settings].
❑
Press [On].
Summary of Contents for imageRUNNER 5570
