Canon imagePROGRAF iPF8300S, User Manual

Page: 964 / 1172

Setting Item Description, Instructions
Adjust
Printer Cali-
bration
" Set Exec. Guide " If you select On , a message is displayed on the con-
trol panel at the timing recommended for executing
color calibration.
Return Defaults Clear the color calibration adjustment value and the
execution log.
Main-
te-
nance Head Cleaning Clean the Printhead.
(See "
Cleaning the Printhead
.")
→P.1012
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose
Head Cleaning B if no ink is printed at all, or
if printing is not improved by Head Cleaning A .
Nozzle Check Print a test pattern to check the nozzles.
Replace P.head Execute when replacing the Printhead. Follow the in-
structions displayed to complete the required proce-
dure.
(See " Replacing the Printhead .")
→P.1013
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
Repl. maint cart Execute when replacing the Maintenance Cartridge.
Follow the instructions displayed to complete the re-
quired procedure.
(See " Replacing the Maintenance
Cartridge .")
→P.1028
Head
Info Printhead L Indicates information about the printhead.
Printhead R
Repl. S. Cleaner Replace the Shaft Cleaner. Follow the instructions
displayed to complete the required procedure.
(See
" Replacing the Maintenance Cartridge .")
→P.1028
Change Cutter Replace the Cutter Unit. Follow the instructions dis-
played to complete the required procedure.
(See " Re-
placing the Cutter Unit .")
→P.1024
Once you replace the Cutter Unit, you can also reset
the cut counter.
Inter-
face
Setup EOP Timer Specify the timeout period before cancellation of print
jobs that cannot be received by the printer.
TCP/
IP IPv4 IPv4 Mode Choose whether the printer IP address is configured
automatically or a static IP address is entered manual-
ly.
Proto-
col DHCP Specify the protocol used to configure the IP address
automatically.
BOOTP
RARP
IPv4
Set-
tings IP Address Specify the printer network information when using a
static IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
The value that was automatically configured is dis-
played if you have set
IPv4 Mode to Automatic .
Subnet Mask
Default G/W
Control Panel > Printer Menu >
Menu Settings iPF8300S
9
944