Canon imagePROGRAF iPF8300S, User Manual

Page: 25 / 1172

If the Data Lamp is flashing, the printer is receiving a print job. Turn off the printer only after printing is finished.
2.
Hold down the Power button for more than a second.
After " Shut Down.. Please Wait.. " is shown on the Display Screen, the printer shuts off.
Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow these steps to load and print on rolls.
• For details on using the Output Stacker, see " Using the Output Stacker ."
→P.823
• For details on using the optional Media Take-up Unit, see " Media Take-up Unit ."
→P.911
Important
• If you are not using the optional Media Take-up Unit when printing long documents such as banners,
spread a clean cloth or paper on the floor. Use the Output Stacker to prevent long printed documents
from being soiled by the floor after they are printed.
(See " Using the Output Stacker .")
→P.823
Note
• For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide.
(See
" Paper Sizes .")
→P.775
(See " Types of Paper .")
→P.774
• To wait until the ink dries after printing before cutting the roll, set Drying Time in the printer driver.
(See " Specifying the Ink Drying Time for Rolls .")
→P.800
• Once you have used all the paper on a roll, clean the platen. If the Platen inside the Top Cover becomes
dirty, it may soil the underside of paper.
(See " Cleaning Inside the Top Cover .")
→P.1040
Basic Printing Workflow > Printing procedure >
iPF8300S Loading and Printing on Rolls
1
5