Canon imagePROGRAF iPF8300S, User Manual

Page: 1116 / 1172

MediaType Mismatch
Cause Corrective Action
When Detect Mismatch in the Control
Panel menu is set to Pause , the type of pa-
per loaded does not match the type speci-
fied in the printer driver.
Follow these steps to ensure the paper type matches on the printer and in
the printer driver.
1.
Press ▲ or ▼ to select Stop Printing , and then press the OK button.
2.
Change the paper type setting in the printer driver to the type loaded in
the printer and try printing again.
Follow these steps to ensure the paper type matches on the printer and in
the printer driver.
1.
Press ▲ or ▼ to select Change Paper , and then press the OK button.
2.
Replace the loaded paper with paper of the type and size you have
specified in the printer driver.
(See " Loading and Printing on Rolls .")
→P.5
(See " Loading and Printing on Sheets .")
→P.9
Press ▲ or ▼ to select Print , and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the print-
ing quality.
You tried to print a test pattern for printer
adjustment on several sheets, but sheets of
different types of paper were used. When printing a test pattern for adjustment, use sheets of the same type
of paper, in the required quantity. Replace the paper as follows and per-
form adjustment again.
1. Lift the Release Lever and stop printing.
2. Replace the paper.
(See " Loading and Printing on Sheets .")
→P.9
3. Execute adjustment again from the control panel menu.
When Detect Mismatch in the Control
Panel menu is set to Warning , the type of
paper loaded does not match the type
specified in the printer driver.
You can continue to print, but note that this error may cause problems in
the printing results.
The paper is too small.
Cause Corrective Action
When Detect Mismatch in the Control Panel
menu is set to Pause or Hold Job , paper small-
er than the size specified in the printer driver is
loaded.
Press ▲ or ▼ to select Print , and then press the OK button to re-
sume printing.
However, note that this error may cause paper jams and affect the
printing quality.
Adjust the paper size setting in the printer driver to match the size
loaded in the printer as follows.
1. Press ▲ or ▼ to select Stop Printing , and then press the OK but-
ton.
2.
Change the paper size setting in the printer driver to the size loa-
ded in the printer and try printing again.
Replace the loaded paper with paper of a size that matches the size
setting in the printer driver as follows.
Error Message > Messages regarding paper >
MediaType Mismatch iPF8300S
13
1096