Canon imagePROGRAF iPF8300S, User Manual

Page: 1100 / 1172

6.
Using the back of the Cleaning Brush, move the Switch to the side opposite ●, corresponding to the size of the paper
for printing.
In this case, note that you will move the switch in the opposite direction from the direction in step 4.
7.
Close the Top Cover.
The contrast becomes uneven during printing
Cause Corrective Action
The paper feed amount is out of adjust-
ment. Adjust the feed amount.
(See "
Adjusting the Feed Amount
.")
→P.856
The type of paper specified in the printer
driver does not match the type loaded in
the printer. Load paper of the same type as you have specified in the printer driver.
(See " Loading Rolls in the Printer .")
→P.786
(See " Loading Sheets in the Printer .")
→P.813
Make sure the same type of paper is specified in the printer driver as you
have loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
The length of printed images is inaccurate in the feeding direction
Cause Corrective Action
In the Control Panel menu, Adj. Priority
is set to Print Quality .
Set Adj. Priority to Print Length in the Control Panel menu, and then ex-
ecute Adjust Length .
(See " Adjusting the Feed Amount .")
→P.856
The type of paper specified in the printer
driver does not match the type loaded in
the printer. Load paper of the same type as you have specified in the printer driver.
(See " Loading Rolls in the Printer .")
→P.786
(See " Loading Sheets in the Printer .")
→P.813
Make sure the same type of paper is specified in the printer driver as you
have loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Troubleshooting > Problems with the printing quality >
The contrast becomes uneven during printing iPF8300S
12
1080