Canon DADF-Q1, Service Manual

Page: 83 / 156

Chapter 3
3-5
F-3-28
3) Remove the three mounting screws [1], and detach the separation motor
unit [2].
F-3-29
3.3.2.4 Removing the Pickup Motor Unit
0011-2446
1) Disconnect J601 [1] and J602 [2], and free the cable from the edge saddle
[3].
F-3-30
2) Remove the two screws [1], and detach the belt motor driver PCB unit
[2].
F-3-31
4) Detach the fan mtor unit [1] by removing the two screws [2].
F-3-32
5) Disconnect the pick up motor unit [1] connecter [2] and open/ closed
sensor (rear) [3] connecter [4].
F-3-33
6) Remove the two mounting screws [1], and detach the pickup motor
unit [2].
F-3-34
3.3.3 Delivery Motor
3.3.3.1 Disconnecting the DADF
0011-8136
1) Turn off the copier.
2) Disconnect the DADF's communication cable [1] from the copier.
F-3-35
3) Open the DADF fully.
4) Standing at the rear of the copier, lift the DADF to detach.
MEMO:
The hinge foot is equipped with a locking mechanism, requiring the DADF
[1]
[1]
[1]
[2]
[1] [2] [3]
[1]
[2]
[1]
[2]
[2]
[1]
[4]
[3]
[1]
[2]
[1]