Canon DADF-Q1, Service Manual

Page: 93 / 156

Chapter 3
3-15
F-3-99
3.4.3 Feed Belt
3.4.3.1 Removing the Front Cover
0011-8210
1) Remove the front cover [1].
-Three screws [2] (remove)
-One screw [3] (loosen)
F-3-100
F-3-101
F-3-102
3.4.3.2 Removing the Feeding Belt
0011-2657
1) Turn the releasing lever [1] clockwise to decrease the tension of the belt.
F-3-103
2) Turn the releasing levers (left/ right) [1] outward after removing the two
fixing screws [2] each.
F-3-104
F-3-105
3) Detach the feeding belt [1].
F-3-106
3.4.3.3 Attaching the Feeding Belt
0011-2658
1) Insert a screwdriver between the DADF and the feeding assembly as
shown to increase the gap.
2) Fit in the feeding belt, and pull out the screwdriver when the belt has
come into contact with it; then, push in the belt.
[5]
[4]
[1]
[1]
[4]
[5]
[1]
[2] [1]
[2]
[1]
[1]