Canon DADF-Q1, Service Manual

Page: 15 / 156

Chapter 1
1-1
1.1 Product Specifications
1.1.1 ADF Specifications
0011-1972
T-1-1
Item Description Remarks
Original pickup auto
Original placement original tray face-up
manual feeder face-down: against rear end
Original separation top separation
Original type Sheet
Original weight original tray 50 to 216g/m2 However, if large-size double-sided,
100 g/m2; if longer than 432 mm, 60
to 90 g/m2.
manual feeder 38 to 216g/m2
Original size A5 to A3 / STMT to 279.4X431.8mm (11'X17')
feed direction: 139.7 to 432.0 mm (630.l0 mm)
cross-feed direction: 182.0 to 297.0 mm Value in parentheses represents extra-
long paper.
Original tray capacity small-size 100 sheets In below 80g/ m2paper. The
manuscripts exceeding 80g/m2 are
base weight conversion.
A5, A4, B5, STMT, LTR, A4R, B5R, LTRR
large-size 100 sheets 80 g/m2 or less.
If heavier than 80 g/m2, conversion
used.
If longer than 432 mm, 1 sheet.
A3, B4, LGL, 279.4X431.8mm (11'X17')
Original reference tray center
manual feeder rear
Original reading stream (single-sided)/fixed
Pre-cycle end no
Control panel no
Display no
Original AE detection no (image processing after reading by host machine)
2-on-1 no (image processing after reading by host machine)
Original handling single-sided, double-sided
Stream reading yes (all sizes; with 20% to 200% only on one side)
Manual feeding yes (1 sheet)
Original size identification yes
Residual original detection yes (in combination with host machine)
Jam recovery yes
Count mode no
Original size mix yes (limited to same paper series; width)