Canon DADF-Q1, Service Manual

Page: 85 / 156

Chapter 3
3-7
F-3-43
3.3.3.4 Removing the Delivery Motor
0011-2485
1) Remove the screw [1] from the bottom of the DADF, and remove the bear-
ing [2] and the rod [3].
F-3-44
2) Remove the four screws [1], and detach the hinge (right) [2].
F-3-45
4) Remove the screw [1], and detach the delivery motor sensor [2].
F-3-46
4) Remove the grip ring [1], and detach the lock plate [2].
5) Remove the E-ring [3], and remove the belt retaining washer [4] and
the gear [5].
6) Remove the screw [6], and detach the delivery motor [7].
F-3-47
If you have replaced the delivery motor, be sure to adjust the sensor and the
delivery motor.
3.3.4 Separation Motor Unit
3.3.4.1 Removing the Front Cover
0011-9101
1) Remove the front cover [1].
-Three screws [2] (remove)
-One screw [3] (loosen)
F-3-48
F-3-49
F-3-50
3.3.4.2 Removing the Main Cover
0011-9102
1) Open the upper cover, and insert a screwdriver from above the hook; then,
remove the two hooks [1].
[1]
[1]
[1]
[1]
[3]
[2]
[2] [3] [1]
[1]
[1] [1] [2]
[1]
[1]
[2]
[1]
[6]
[2]
[5]
[3] [4]
[7]
[1]