Canon DADF-Q1, Service Manual

Page: 116 / 156

Chapter 4
4-6
F-4-14
4.2.4.5 Belt Assembly
0011-2669
1)Dry wipe the original feeding belt while moving it in the direction of the arrow.
If the dirt is excessive, wipe it with a cloth moistened with a solution of mild detergent; then, dry wipe it.
F-4-15
4.2.4.6 Original Trailing Edge Sensor
0011-2670
1) Clean the sensor widow in the original tray using a blower brush.
F-4-16
4.2.4.7 Original Sensor
0011-2671
1) Remove the pickup assembly cover.
2) Clean the light-receiving area of the sensor stay and the light-emitting area at the rear of the guide plate using a blower brush.
F-4-17
4.2.4.8 Separation Paper/Skew Paper
0011-2677