Canon CLC5100 Series, Manual

Page: 158 / 290

Chapter 5
ޓ
5-28
<BLTDRFT> DISPLAY > BLTDRFT
T-5-15
DISPLAY > BLTDRFT
Sub item Dscription
for example <F TO B
ޓ
XXXX
ޓ
YYYY
ޓ
ZZZZ>
for example <F TO B C.Time XXXX
ޓ
YYYY>
XXXX:Most recent data YYYY:Second most recent data
ZZZZ:Third most recent data
Unit: 0.1 sec
DIR Indicates the present swing condition (direction) of the transfer belt.
B>F: moving (swinging) from rear to front
F>B: moving (swinging) from front to rear
BELT POS Indicates the present condition (position) of the transfer belt.
FRONT: near front CENTER: near center
BACK:near rear
FST Indicates the time required by the transfer belt between when it
reaches the transfer belt edge sensor (PS17, front) and when it
leaves the sensor.
F TO B Indicates the time required by the transfer belt between when it
reaches the transfer belt edge sensor (PS17, front) and when it
reaches the end sensor 2 (PS18, rear).
BST Indicates the time required by the transfer belt between when it
reaches the transfer belt edge sensor 2 (PS18, rear) and when it
leaves the sensor.
B TO F Indicates the time required by the transfer belt between when it
reaches the transfer belt edge sensor 2 (PS18, rear) and when it
reaches the end sensor 1 (PS17, front).
F TO B C.Time Indicates data (F TO B data minus FST data); time taken by the belt
to move from front to back.
B TO F C.Time Indicates data (B TO F data minus BST data); time taken by the belt
to move from back to front.
TOTAL Indicates data (F TO B data plus B TO F data); time taken by the
belt to make a round trip.