Canon CLC5100 Series Manual Download Page 200

Page: 200 / 290

Chapter 5

5-70

RECOVR

Use it to execute recovery without moving the scanner for recovery

copying after the presence of a jam or the absence of toner/oil/paper has

been identified.

Settings: 0 to 1

Standard: 0

0: normal operation

1: no rescanning during recovery copying

Conditions: RDF not used, page separation not used, auto vertical/

horizontal rotation not used, doublesided copying not used, enlargement

page separation not used, reduced image page composition not used.

Record any new values on the service data sheet.

OHP

MODE

Select the maximum density when making a copy outo a transparencies.

Settings range: 0 to 2

Standard: 0

If the value is increased, the density becomes darker.

Reference: The projector for OHP has a reflection type and translucent

type. It is preferable to lower the maximum copy density value in the case

of the translucenttype projector; therefore, change the maximum copy

density setting according to a projector at user's site.

SMPNUM

Use it to change the range of sampling of the data representing the color

selected on an original for color conversion.

Settings: 0 to 1

Standard: 0

0: sample selected color in area of 2x2 (standard)

1: sample selected color in area of 4x4

Record any new values on the service data sheet.

Reference: In the case of an original composed of dots, correct color

identification may not be identified; if such is the case, set it to '1' to

increase the number of samplings.

THINAPS

Use it to enable auto paper selection for thin paper.

Settings: 0 to 1

Standard: 0

0: disable auto paper selection

1: enable auto paper selection

Record any new values on the service data sheet.

Reference: Thin paper will not be selected if of the following modes is

selected:

sort, group, staple

doublesided

OPTION > ROPT

Sub item

Description

Summary of Contents for CLC5100 Series



































































































































































































































































































Search results

Summary of Contents for CLC5100 Series

Reviews:

Related manuals for CLC5100 Series

Brands by name

Popular brands

Canon CLC5100 Series, Manual

Search results

Summary of Contents for CLC5100 Series

Reviews:

Related manuals for CLC5100 Series

Brands by name

Popular brands