Canon CLC5100 Series, Manual

Page: 169 / 290

Chapter 5
5-39
<ENVSET> ADJUST > ENVSET
T-5-25
reference
The settings of 'ENVSET' are stored as soon as the CPU on the DC controller PCB is supplied with power (i.e., when
the power plug is conected to the power outlet), and will be renewed every 8 hr.
<HVTR> ADJUST > HVTR
This mode will prove effective when correcting transfer faults under each item in question.
T-5-26
ADJUST > ENVSET
Sub item Description
BODY (ºC)
BODY (%)
BODY (g)
Indicates the machine internal temperature (ºC), internal humidity (%),
internal humidity absolute value (g) measured by the environment sensor.
Same as the reading under 'DISPLAY > ANALOG'
> Indicates the present environment.
ENVA to G Sets ON/OFF of the cassette heater.
The heater will turn on if the internal humidity absolute value exceeds the
setting.
OFF Sets to OFF for all environment.
ADJUST > HVTR
Sub item Description
Settings range: 5 to +5
ޓ
Standard: 0
ޓ
unit: 1.0 uA
Record any new values on the service data sheet
(excluding BODY (ºC), BODY (%), BODY (g), ZONE A/B/C and << ZONE A >>)
BODY (ºC)
BODY (%)
BODY (g)
Indicates the machine internal temperature (ºC), internal humidity (%),
internal humidity absolute value (g) measured by the environment
sensor.
Same as the reading under 'DISPLAY > ANALOG'
TRYOFS
C/M/Y/K
Adjusts the transfer highvoltage output.
If you have changed the settings of 'TRYOFSC/M/Y/K',check to
make sure that the value of 'TR#' for each zone is '0'; otherwise, enter
'0'.
ZONE A/B/C Indicates the machine internal humidity absolute value (g) in the three
ranges of A through C.
<< ZONE A >> Indicates the zone in which the setting shown is effective.