Canon CLC5100 Series, Manual

Page: 106 / 290

Chapter 3
3-8
xxB2
Developer (deterioration)
Developing cylinder (rotation failure)
Developing assembly (locking failure)
Toner density sensor (faulty)
Developer (inside developing assembly;
stirring failure)
Toner level sensor (faulty)
When setting initial data, the average after sampling of
the following values is 255. SIGGC, SIGGM, SIGGY
xxB5
When setting initial data, the average after sampling of
the following values is 777 or lower: SGNLC, SGNL
M, SGNLY
xxB6
Developer (deterioration)
Developing cylinder (rotation failure)
Developing assembly (locking failure)
Toner density sensor (faulty)
Developer (inside developing assembly;
stirring failure)
Toner level sensor (faulty)
When setting initial data, the average of the following
values after sampling is 205 or lower: REFC, REFM,
REFY
xxB7
When setting initial data, the average of the following
values after sampling is 0: SIGGC, SIGGM, SIGGY
xxBA
Developer (deterioration)
Developing cylinder (rotation failure)
Developing assembly (locking failure)
Toner density sensor (faulty)
Developer (inside developing assembly;
stirring failure)
Toner level sensor (faulty)
During copying sequence, the average of the following
values after sampling is 1013 or higher: SGNLC,
SGNLM, SGNLY
xxBB
During copying sequence, the value of the following is
30% or more higher than the initial setting: REFC, REF
M, REFY
xxBC
Developing assembly (deterioration)
Developing cylinder (rotation failure)
Developing assembly (locking failure)
Toner density sensor (faulty)
Developer (inside developing assembly;
stirring fault)
Toner level sensor (faulty)
During copying sequence, the average of the following
values after sampling is 306 or higher: SGNLC, SGNL
M, SGNLY
xxBD
Developing assembly (deterioration)
Developing cylinder (rotation failure)
Developing assembly (locking failure)
Toner density sensor (faulty)
Developer (inside developing assembly;
stirring fault)
Toner level sensor (faulty)
REFDuring copying sequence, the value of the
following is 30% or more lower than the initial setting:
REFC, REFM, REFY
xxBF
When setting initial data, the values of the following
cannot be set: SIGGC, SIGGM, SIGGY
xxF1
Toner sensor (faulty)
Toner stirring screw (faulty)
The C/M/Y hopper error sensor has detected the absence
of toner.
04F2
The Bk hopper error sensor has detected the absence of
toner 10 times or more continuously.
Code Cause
Description