Canon CLC5100 Series, Manual

Page: 197 / 290

Chapter 5
5-67
<IMGREG> FUNCTION > IMGREG
T-5-51
Details of REGERRFLG
0:0000 through 7:0000 corresponds to 8 sets of patterns.
('0000' indicates the absence of an error; if an error is found in all 8 sets, 'E194' will be indicated. If any of the sets
is '0000', its data will be used for correction.)
FUNCTION > IMGREG
Sub item Description
AUTOADJ Use it to execute the series of operations for image position
correction control.
<P>READY>SERVICE>READY
Remarks: 1 min (approx.)
MREAD Use it to indicate the start position of reading the pattern for M.
MWF
MWR
Use it to indicate the start position of writing the pattern for M.
F: Front. R: Rear.
Y/C/KREGH Use it to correct the write start position of the pattern for Y/C/K.
(rough adjustment in main scanning direction)
Do not use this item unless 'E194' is indicated (error that disables
image position correction)
Settings range: 0 to 255
ޓ
Standard:128
ޓ
Unit: 1 pixel(63.5 um)
A higher setting shifts the pattern to the rear.
Y/C/KREG
HS
Use it to correct the write start position of the pattern for Y/C/K. (fine
adjusment in main scanning divection)
Do not use this item unless 'E194' is indicated (error that disables
image position correction)
Settings range: 0 to 3
ޓ
Standard: 0
ޓ
Unit: 1/4 pixel
Y/C/KREGV Use it to correct the write start position of the pattern for Y/C/K. (sub
scanning direction)
Do not use this item unless 'E194' is indicated (error that disables
image position correction)
Settings range: 0 to 255
ޓ
Standard: 128
ޓ
Unit: 1 pixel(63.5 um)
REGERRFLG Indicates how the image position correction pattern is read. See the
details section.