Canon CLC5100 Series, Manual

Page: 92 / 290

Chapter 2
2-40
2.8.7 Adjusting the
Position of the Duplexing
Unit Paper Deflecting
Plate Solenoid (SL11)
0002-4859
CLC5100 / CLC4000
1) Remove the duplexing unit.
2) Fix the solenoid in place with a mounting screw [3]
after moving the solenoid to the delivery direction
while the plunger [2] of the solenoid [1] is pushed
in.
ޓ
rear
F-2-57
2.8.8 Adjusting the
Position of the Duplexing
Unit Stacking Assembly
Paper Guide Plate
0002-5785
CLC5100 / CLC4000
1) Select A3 or 11x17, and copy on the first side of a
twosided copy.
2) Slide out the duplexing unit to the front.
3) Measure the distance L of the paper guide plate [1].
A3 : L = 297.5 ±0.5 mm
11x17 : L = 297.5 ±0.5 mm
ޓ
F-2-58
ޓ
4) If the measurement is outside the standards, remove
the duplexing unit front cover.
5) Loosen the screw [2], and turn the adjusting screw
[3]; then, adjust the position of the paper guide plate
home position sensor.
ޓ
F-2-59
2.8.9
Adjusting the
Position of the Duplexing
Unit Feeding Roller
Solenoid (L13)
0002-5789
CLC5100 / CLC4000
Let the feeding roller drop to the bottom of the duplex
feeding assembly on its own weight.At this time, fix
the solenoid [3] so that the endtoend distance
between the lever [1] and the arm [2] is 1.5 ±0.5 mm
when the plunger of the solenoid is pushed.
ޓ
[1]
[3]
[2]
L
[1] [1]
[2]
[3]