Canon CLC5100 Series, Manual

Page: 46 / 290

Chapter 1
1-32
F-1-10
1.4.7 How to Clean the SALT Sensor
0002-8832
CLC5100 / CLC4000
1)Take off toner accumulated on the second scoopup sheet [1] to a piece of paper.
Exercise caution not to hit the positioning pin located at the rear of the SALT sensor unit because it might be
deformed when being hit.
2)Clean the second scoopup sheet with dry lintfree paper or a blower brush.
Exercise caution not to deform the second scoopup sheet.
3)Wipe out toner adhered on the lower mylar [2] with dry lintfree paper.
F-1-11
4)Wipe out toner adhered on the surface of the sensor cover [3] and visible portion of the shutter [4] with a blower
brush.
Exercise caution not to deform the shutter, which is fragile.
[1]
[2] [2]
[1]
[2]