Canon CLC5100 Series, Manual

Page: 156 / 290

Chapter 5
ޓ
5-26
T-5-12
ERROR
<RFINF> DISPLAY > RFINF
T-5-13
1219 Lower Eject Sensor Delay Jam When the lower eject sensor (PI5) does not detect
the paper after a prescribed time has elapsed since
the vertical path sensor 2 (PI3) detected the tip of the
paper.
1328 Upper Eject Sensor Detention
Jam
When the paper does not come out of the upper eject
sensor (PI4) after a prescribed time has elapsed
since the upper eject sensor (PI4) detected the tip of
the paper.
1329 Lower Eject Sensor Detention
Jam
When paper does not come out of the lower eject
sensor (PI5) after a prescribed time has elapsed
since the lower eject sensor (PI5) detected the tip of
the paper.
133F Remaining Jam in the Path When the stacker receieved the sorter start signal
while either pass sensor turned it on.
1408 Door Open Jam When the stacker is disconnected from the host
machine or the top cover is opened while operating.
1438 Eject Cover Open Jam When the eject cover is opened during operation.
1507 Power On Jam When paper is detected inside the stacker when the
power is turned on or when the cover is closed.
DISPLAY > JAM/ERR
Sub item Description
CODE Indicates the appropriate error code (E) for the results of self diagnosis.
E000 Indicates detail codes for each error code.
(See the descriptions on self diagnosis.)
HIST0 to 9 Indicates a history of error codes (E).
ERACLR Clears all error code histories.
DISPLAY > RFINF
Sub item Description
STATUS1/2/3/4 For R&D
Code Jam Type Description